The Emergency Caller - Personal Emergency Response System

Easy Programming Display LCD panel is used to display programming, test, and status information. "Listen In" Capability Called party may "listen in" to voice and other sounds from the caller. The Voice Message Sends a personalized pre-recorded emergency voice message (up to 20 seconds in length) three times to four different numbers. Automatic 2-way speakerphone activates immediately after the pre-recorded message is delivered. Phone Numbers and EEPROM Memory You can pre-program up to four contact numbers. The Emergency Caller will automatically skip to the next number when a busy signal is detected or when a telephone is not answered. The Emergency Caller will then keep calling until a message is delivered or The Emergency Caller is deactivated. Voice messages and phone numbers remain stored even after a power failure. The Emergency Caller will automatically send a voice message to one of the four phone numbers you provide, contacting those who will make a difference: In the event of an emergency, The Emergency Caller can contact: Family or Neighbors People at work Emergency Services Cellular Phones and Pagers Battery Backup Built-in battery backup (with low battery indicator) will keep unit fully operational for a minimum of 4 hours during power outages. Telephone Hookup Two jacks are provided for direct connection to a telephone line and a standard telephone. Tone and Pulse Mode compatibility.